Features:
Size 1/2" to 4" NPT
Body 316 Stainless Steel
Seat PTFE
Pressure 130 Bar
Temperature -20°C to 180°C
Actuation Lockable Lever
Fire Safe API607 Approved
2 way 3 piece full bore investment cast 316 stainless steel ball valve with lockable lever and solid ball. ISO5211 mounting pad, length to DIN 3202-M3. Fire Safe approved certificate number 249036.
| Size | d | L | H | h | W | C | ISO5211 | Kg |
|---|---|---|---|---|---|---|---|---|
| 1/2" | 15 | 75 | 70 | 42 | 117 | 9 | F03/F04 | 0.6 |
| 3/4" | 20 | 80 | 78 | 50 | 134 | 11 | F04/F05 | 1.06 |
| 1" | 25 | 90 | 87 | 58 | 134 | 11 | F04/F05 | 1.41 |
| 1 ¼" | 32 | 110 | 98 | 64 | 203 | 14 | F05/F07 | 2.32 |
| 1 ½" | 40 | 120 | 104 | 69.5 | 203 | 14 | F05/F07 | 3.26 |
| 2" | 50 | 140 | 112 | 78 | 203 | 14 | F05/F07 | 4.13 |
| 2 ½" | 65 | 185 | 140 | 100 | 255 | 17 | F07/F10 | 8.58 |
| 3" | 80 | 205 | 153 | 112.5 | 255 | 17 | F07/F10 | 13.3 |
| 4" | 100 | 240 | 166 | 125.5 | 302 | 17 | F07/F10 | 22.3 |
All dimensions in mm unless shown otherwise.
| Item | Part | Material | Qty |
|---|---|---|---|
| 1 | Cap | CF8M | 1 |
| 2 | Body | CF8M | 1 |
| 3 | Ball | SS316 | 1 |
| 4 | Ball Seat | Pure PTFE | 2 |
| 5A | Body Gasket A | Pure Graphite | 1 |
| 5B | Body Gasket B | Pure Graphite | 1 |
| 6 | Thrust Washer | Pure PTFE | 1 |
| 7 | Stem | SS316 | 1 |
| 8 | O-ring | Viton | 1 |
| 9A | Stem Packing A | Pure Graphite | 1 |
| Item | Part | Material | Qty |
|---|---|---|---|
| 9B | Stem Packing B | Pure Graphite | 1 |
| 10 | Gland | SS304 | 1 |
| 11 | Bellevlle Washer | SS301 | 2 |
| 12 | Nut Stopper | SS304 | 1 |
| 13 | Plate Washer | SS304 | 1 |
| 14 | Nut | SS304 | 2 |
| 15 | Handle | SS304 | 1 |
| 16 | Bolt | SS304 | 4 |
| 17 | Handle Cover | Plastic | 1 |
| 18 | Stop Pin | SS304 | 1 |
Size 1/2" to 4" NPT
Body 316 Stainless Steel
Seat PTFE
Pressure 130 Bar
Temperature -20°C to 180°C
Actuation Lockable Lever
Fire Safe API607 Approved
-
What is a NPT 2 Way Stainless Steel Fire Safe Ball Valve?
A three piece two way stainless steel fire safe ball valve is constructed of three separate body pieces and held together by the use of stainless steel bolts at either end. Our design also has a direct mounting pad for mounting actuators without the use of a bracket and drive dog. They also have a pure teflon (PTFE) seat with pure graphite body gasket and a solid stainless steel ball.
-
How does a NPT 3 Piece Two Way Fire Safe Ball Valve work?
The 3 piece 2 way fire safe ball valve works the same as any normal two way ball valve whereby the ball is rotated 90 degrees within the body of the valve which will either open or close the valve. The ball itself has a hole at either end which the media will flow through when it is open. When the valve is closed these holes are blocked off to the flow effectively isolating the media either side of the valve. The ball is turned by a handle (or actuator) which is connected to a shaft which in turn is mated to the ball by a female slot. When it is operated by a handle (our handles are lockable) there is a stop pin which only allows you to operate the valve in a 90 degree turn (this will take you from open to close or vice versa). When it is operated by a gear box the gear box will hit its stop on the worm drive which will not let the ball rotate past 90 degrees.
-
How long will my Threaded Fire Safe Stainless Steel Ball Valve last?
Like any valve this depends upon the usage case of your ball valve, its environment, media and how many times it is cycled. For instance if it is on a clean media, in a clean environment and not cycled regularly the life will be decades. If it is on a corrosive media and in a dry application with a high cycle rate the life will be much shorter. We conduct regular lab testing and 30,000 cycles is a reasonable life cycle depending upon the application. Being a 3 piece construction it is relatively easy to change the seats out when there wear which is the main perishable in the valve.
-
How do I install a Threaded Fire Safe Stainless Steel Ball Valve?
These have female paralell NPT threaded ends so it is best to put a male tapered NPT fitting into the valve ends. Thread tape or a sealant should be used to help the seal and also if dissimilar metals are used it will reduce dissimilar metal corrosion. The tie rods can be undone if needed and the ends installed by themselves but this is usually unnecessary and you would have to measure the exact face to face before your installation.
-
What are typical uses of a three piece two way stainless steel ball valve?
As these ball valves are fire safe approved they are used anywhere a threaded fire safe certified ball valve is needed. They can also be used in any other application as long as the media, temperature and pressure is compatible with the ball valve.
-
How long will my product take to get to me?
This depends upon where you are based and the freight method chosen. If the express freight option is selected it is usually next day delivery to metropolitan areas in Australia for under 5kg. If free freight has been selected it will go by road freight which can be anywhere from 1 to 10 days depending upon your location. It usually averages 3 days.
-
What warranty do I get?
All of our products come standard with a 12 month warranty. The good news is we have very strict quality controls and all valves leave our warehouse tested (full material and testing certificates to API598 are available) and inspected so there are rarely any issues. Also once your valve is in and operating it will most likely continue to do so for a very long time.
