My Account

My Cart

$0.00

Shop By Category

Free Shipping Australia Wide

Chemical Compatibility

Step 1.

Choose the Media

Step 2.

Choose the Material

Compatibility

Ratings -- Chemical Effect

A = Excellent.
B = Good -- Minor Effect, slight corrosion or discoloration.
C = Fair -- Moderate Effect, not recommended for continuous use. Softening, loss of strength, swelling may occur.
D = Severe Effect, not recommended for ANY use.
N/A = Information not available.

The information given in this table is only a guide and has been compiled by accepted industry knowledge and field experience of engineers. It is designed ONLY as a guide and each individual media should be tested to confirm acceptance. Every application is different and warrant no liability of its use.

These ratings are based on room temperature (22°C) and for a 48 hour period only. All chemicals behave differently with different pressures, temperatures, environments and concentrations so a material or elastomer may fail even after an initial test.

Personal protective equipment must always be used when in vicinity with chemicals. Serious injury may result.

Features:

Description:

Ratings -- Chemical Effect

A = Excellent.
B = Good -- Minor Effect, slight corrosion or discoloration.
C = Fair -- Moderate Effect, not recommended for continuous use. Softening, loss of strength, swelling may occur.
D = Severe Effect, not recommended for ANY use.
N/A = Information not available.

The information given in this table is only a guide and has been compiled by accepted industry knowledge and field experience of engineers. It is designed ONLY as a guide and each individual media should be tested to confirm acceptance. Every application is different and warrant no liability of its use.

These ratings are based on room temperature (22°C) and for a 48 hour period only. All chemicals behave differently with different pressures, temperatures, environments and concentrations so a material or elastomer may fail even after an initial test.

Personal protective equipment must always be used when in vicinity with chemicals. Serious injury may result.

WARNING

These products are intended for use in industrial applications only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’ and in our individual ‘Series’ data sheets. Before using these products with fluids other than these specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Process Systems Pty Ltd. Through misuse, age, or malfunction, components used in industrial valve applications can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in industrial valve applications and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to the user in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings or specifications found in instruction sheets or labels packed or attached and shipped with the products. Our policy is one of continuous research and development. We therefore reserve the right to amend without notice the specifications given in this document or our individual ‘Series’ data sheets.

WARRANTY INFORMATION

All valve series and other products manufactured or distributed by Process Systems Pty. Ltd. are warranted by Process Systems to be free of defects in material and workmanship for a period of 1 year from the date of purchase or as the manufacturer warrants. Process Systems obligation under this warranty is limited to repair or replacement of the defec1ive product or refund of the purchase price paid solely at the discretion of Process Systems and provided such defective product is returned to Process Systems freight prepaid and upon examination by Process Systems such product is found defective. This warranty shall be void in the event that the product has been subject to misuse, misapplication, improper maintenance, modification or tampering. This warranty is expressed in lieu of all other warranties, expressed or implied from Process Systems Pty. Ltd. representatives or employees. Process Systems reserves the right to change Valve and Brochure specifications without notice.

.