SKU: BLPF

Flanged UV Stabalised PVC Manual Ball Valve

From $44.00

Inc GST
In Stock
Make an Enquiry

2 way UV stabilised ANSI 150 Flanged PVC true union ball valve. Comes with PTFE (Teflon) seats and our unique double stem seal system (standard in EPDM but also available in Viton).  Also features a chem lock insert In the end so the true union can be removed for service work and the ball will not leak when in the closed position. Great PVC ball valve for corrosive or chemical media where traditional material such as brass and stainless steel are not suitable. Commonly used in the aquaculture industry (sea water), chemical dosing, water treatment and pool filtration. 

Model Size DN(mm) Media Pressure Media Temperature Torque (Nm)
BLP6F-L-E 1 25 Vacuum to 10 Bar Ambient 4
BLP7F-L-E 1 ¼ 32 Vacuum to 10 Bar Ambient 5
BLP8F-L-E 1 ½ 40 Vacuum to 10 Bar Ambient 7.5
BLP9F-L-E 2 50 Vacuum to 10 Bar Ambient 8.5
BLP10F-L-E 2 ½ 65 Vacuum to 10 Bar Ambient 13
BLP11F-L-E 3 80 Vacuum to 10 Bar Ambient 16
BLP12F-L-E 4 100 Vacuum to 10 Bar Ambient 25

Change 'E' to 'V' for FKM seals. 

UPVC ANSI 150 Flanged Ball Valve Dimensions

Size d C D L L1 W H1 H2 F M I n-e
15 15 60.5 95 134 52 84 52 27.5 31 - M6 4-15
20 20 70 105 144 54 90 59 32 33 - M6 4-15
25 25 79.5 125 160 62 106 67.5 37.25 40 - M6 4-19
32 32 89 140 178 70 116 77.5 42.75 52 - M8 4-19
40 40 98.5 150 195 79.5 128 90 50 52 - M8 4-19
50 50 120.7 165 215 85 140 106 60 70 - M8 4-19
65 63 139.7 182 320 133 210 136.5 76.5 84 45 M10 4-19
80 75 152 200 350 146 235 149.5 86 84 45 M10 8-19
100 90 190.5 228 395 160 260 175 107 121 49 M12 8-19

All dimensions in mm unless shown otherwise. 

UPVC Flanged Manual Ball Valve

Number Part Name Raw Material QTY
3,4,8,9 O-RIng EPDM or FKM 7
1 Socket End UPVC 2
2 Cap UPVC 2
6 Shaft UPVC 1
7 Handle ABS 1
10 Lining UPVC 1
11 Anti-leak Ring PTFE 2
12 Ball UPVC 1
13 Body UPVC 1
14 Flange Buckle UPVC 2

Size 25mm to 100mm ANSI 150
Body UV stabalised PVC
Seat PTFE
Pressure 10 BAR
Temperature Ambient
Actuation Manual

  • What is a 2 Way ANSI 150 Flanged UPVC Ball Valve?

    A two way ANSI 150 flanged lever opearted UPVC ball valve is constructed of UV Stabalised PVC. It has a lever on the top of the valve which conducts its 90 degree turn (open/close). This kind of ball valve design makes it easy to remove from the line as you do not need to unscrew the valve like you would need to do on a threaded valve. It is also easy to change the valve seats as you can access them directly by unscrewing the union ends. Our design also has a double shaft oring seal to add an extra level of sealing. They have teflon (PTFE) seats and either EPDM or FKM seals (select according to media compatibility).

  • How does a Two Way ANSI 150 Flanged PVC Ball Valve work?

    A flanged PVC ball valves works the same as any normal two way ball valve whereby the ball is rotated 90 degrees within the body of the valve which will either open or close the valve. The ball itself has a hole at either end which the media will flow through when it is open. When the valve is closed these holes are blocked off to the flow effectively isolating the media either side of the valve. The ball is turned by a manually operated lever which is connected to a shaft which in turn is mated to the ball by a female slot. The lever will not allow the ball to be turned past 90 degrees as it has a physical stop contained within the handle design.

  • How long will my Flanged UV Stabalised PVC Ball Valve last?

    Like any valve this depends upon the usage case of your ball valve, its environment, media and how many times it is cycled. For instance if it is on a clean media, in a clean environment and not cycled regularly the life will be decades or more. If it is on a corrosive media and in a dry application with a high cycle rate the life will be much shorter. These valves have repair kits available to refurbish the valve.

  • How do I install a Manual ANSI 150 Flanged PVC Ball Valve?

    As this is an ANSI 150 flanged 2 way valve it will need to be fitted between two of the same flanges (ANSI 150 standard) in the pipework. Between the mated flanges will need to be a gasket to ensure a positive seal. The type of gasket will depend upon the media and temperature, for instance a water application may use EPDM. The bolts should be fitted and then tightened in a diagonal direction to ensure an even fastening force across the face of the flange (for bolt torque refer to the flange standard).

  • What are typical uses of a Flanged PVC Ball Valve?

    These flanged PVC ball valves are mainly used in water treatment or chemical dosing applications however they can really be used in a wide range of other cases as long as the media, temperature and pressure are compatible.

  • How long will my product take to get to me? 

    This depends upon where you are based and the freight method chosen. If the express freight option is selected it is usually next day delivery to metropolitan areas in Australia for under 5kg. If free freight has been selected it will go by road freight which can be anywhere from 1 to 10 days depending upon your location. It usually averages 3 days.

  • What warranty do I get?

    All of our products come standard with a 12 month warranty. The good news is we have very strict quality controls and all valves leave our warehouse tested (full material and testing certificates to API598 are available) and inspected so there are rarely any issues. Also once your valve is in and operating it will most likely continue to do so for a very long time. 

Others Also Bought

.
.