Pneumatic In Line Check Valve

Pneumatic In Line Check Valve

SKU: ACV

Aluminium check valve for air & inert gases

$24.20
Inc GST In Stock
Make an Enquiry
Free Shipping Australia Wide
Size
Select Options

DATA SHEET

Aluminium in line check valve for air and inert gases. It has a 0.5 to 12 BAR operating pressure range with media temperatures from-5 to 60°C. Great for installation in pneumatic systems where backflow prevention is needed. Can install in any direction. From 1/8" to 1" BSP.

Specification ACV-01 ACV-02 ACV-03 ACV-04 ACV-05 ACV-06
Port Size G1/8” G1/4” G3/8” G1/2” G3/4” G1”
Nominal Diameter 6mm 8mm 10mm 15mm 20mm 25mm
Pressure Range 0.5 to 12 BAR
Max Inlet Pressure 12 BAR
Medium Temperature -5 to 60°C
Body Aluminium
Lubrication Not Required
Applicable Medium Air

(ACV)

In line AIr Check Valve

Specification A B C D E
ACV-01 64 53 Ø28 24 G1/8”
ACV-02 64 53 Ø28 24 G1/4”
ACV-03 86 66 Ø39.5 36 G3/8”
ACV-04 86 66 Ø39.5 36 G1/2"
ACV-05 112 90 Ø53.5 46 G3/4”
ACV-06 112 90 Ø53.5 46 G1”
All dimensions in mm unless shown otherwise.

Size 1/8" to 1" BSP
Function Check Valve
Body Aluminium
Pressure Range 0.5 to 12 BAR
Media Air

We Also Recommend


Male Straight Connector Push Fit

SKU: YPC

Male Straight Connector Push Fit

From $1.76

More Info

Others Also Bought


Pneumatic Pilot Check Valve

SKU: APC-01

Pneumatic Pilot Check Valve

$66.00

More Info
In line precision Speed Controller

SKU: APS

In line precision Speed Controller

From $18.70

More Info
Aluminium Shuttle Valve

SKU: ASV

Aluminium Shuttle Valve

From $22.00

More Info
Brass Direct Acting Normally Closed Solenoid Valve

SKU: B25

Brass Direct Acting Normally Closed Solenoid Valve

From $132.00

More Info

More From This Category


3 Way 2 position Palm Button Spring Return Valve

SKU: PBS32

3 Way 2 position Palm Button Spring Return Valve

From $27.50

More Info
3 Way 2 position Palm Button Latching Valve

SKU: PBL32

3 Way 2 position Palm Button Latching Valve

From $66.00

More Info
High Pressure Regulator

SKU: HPR

High Pressure Regulator

From $187.00

More Info
3 Way 2 position Raised Button Spring Return Valve

SKU: RBS32

3 Way 2 position Raised Button Spring Return Valve

From $24.75

More Info

ACV

Pneumatic In Line Check Valve

Features:

Size 1/8" to 1" BSP
Function Check Valve
Body Aluminium
Pressure Range 0.5 to 12 BAR
Media Air

Description:

Aluminium in line check valve for air and inert gases. It has a 0.5 to 12 BAR operating pressure range with media temperatures from-5 to 60°C. Great for installation in pneumatic systems where backflow prevention is needed. Can install in any direction. From 1/8" to 1" BSP.

Specification ACV-01 ACV-02 ACV-03 ACV-04 ACV-05 ACV-06
Port Size G1/8” G1/4” G3/8” G1/2” G3/4” G1”
Nominal Diameter 6mm 8mm 10mm 15mm 20mm 25mm
Pressure Range 0.5 to 12 BAR
Max Inlet Pressure 12 BAR
Medium Temperature -5 to 60°C
Body Aluminium
Lubrication Not Required
Applicable Medium Air
.

Pneumatic In Line Check Valve

ACV

Dimensions:

In line AIr Check Valve

Specification A B C D E
ACV-01 64 53 Ø28 24 G1/8”
ACV-02 64 53 Ø28 24 G1/4”
ACV-03 86 66 Ø39.5 36 G3/8”
ACV-04 86 66 Ø39.5 36 G1/2"
ACV-05 112 90 Ø53.5 46 G3/4”
ACV-06 112 90 Ø53.5 46 G1”
All dimensions in mm unless shown otherwise.

WARNING

These products are intended for use in industrial applications only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’ and in our individual ‘Series’ data sheets. Before using these products with fluids other than these specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Process Systems Pty Ltd. Through misuse, age, or malfunction, components used in industrial valve applications can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in industrial valve applications and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to the user in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings or specifications found in instruction sheets or labels packed or attached and shipped with the products. Our policy is one of continuous research and development. We therefore reserve the right to amend without notice the specifications given in this document or our individual ‘Series’ data sheets.

WARRANTY INFORMATION

All valve series and other products manufactured or distributed by Process Systems Pty. Ltd. are warranted by Process Systems to be free of defects in material and workmanship for a period of 1 year from the date of purchase or as the manufacturer warrants. Process Systems obligation under this warranty is limited to repair or replacement of the defec1ive product or refund of the purchase price paid solely at the discretion of Process Systems and provided such defective product is returned to Process Systems freight prepaid and upon examination by Process Systems such product is found defective. This warranty shall be void in the event that the product has been subject to misuse, misapplication, improper maintenance, modification or tampering. This warranty is expressed in lieu of all other warranties, expressed or implied from Process Systems Pty. Ltd. representatives or employees. Process Systems reserves the right to change Valve and Brochure specifications without notice.

.