Series EM - Electronic Timers This solid state electronic timing unit plugs onto any pneumatic, hydraulic or fluid valve with the square 28mm plug (ISO 4400 interface). There are three standard timer types: Cycle timer, single shot timer, and delay single shot timer. Adaptor plugs are available to suit the smaller DIN 43650B size coils. These timers are multi-voltage 24-240V AC/DC standard or 10-30V DC (optional), with manual test button, external time adjustments, LED 'ON' and LED 'OFF' indicators.

Cycle timer: Upon application of power to the input terminals, the ON cycle is initiated and the solenoid is energised. At the end of the preset ON time, the solenoid is de-energised and the OFF cycle begins. Cycling continues until power is removed from the input terminals.
Single shot timer: Upon application of power, the solenoid is immediately energised and timing begins. At the end of the adjusted time, power is removed from the solenoid. Reset occurs when power is removed from the input terminals.
Delay single shot timer: Upon application of power to the input terminals, the time delay begins. At the end of the preset delay, the solenoid is energised. Reset occurs when power is removed from the input terminals.

		View Series EM Data Sheet

To enquire about any product or to check price and availabilty click on the model number below.

Model #	Function	Time Range
EM-231	Cycle	20 to 300m/sec 'ON', 1 to 45 min 'OFF'
EM-241	Cycle	1 to 60sec 'ON', 1 to 60sec 'OFF'
EM-251	Cycle	1 to 60sec 'ON', 1 to 45min 'OFF'
EM-261	Cycle	1 to 45min 'ON', 1 to 45min 'OFF'
EM-271	Cycle	1 to 60sec 'ON', 60 to 720min 'OFF'
EM-243	Single Shot	1 to 60sec 'ON'
EM-244	Delay/Single Shot	1 to 60sec 'OFF'
AB-ADAPT		Adaptor plug to convert ISO square 28mm to DIN

Some of the files included on site require Adobe® Acrobat® Reader software. You can download this software by clicking the logo.
Process Systems Pty Ltd reserves the right to change valve and product information plus prices without notice.