Series PSM/PSP - Pressure Switch The PSM/PSP pressure switch is adjustable in 0.2 - 300 bar range with a separate adjustment for the differential (changeover value) of up to 30% full scale (preset at approximately 10% f.s.). The units are single pole/double throw (SPDT), able to be wired normally open (NO) or normally closed (NC). Electrical connection is via a DIN plug (PG09) and port connection is 1/4" BSP parallel with an o-ring gasket. Typical uses include: pneumatic, hydraulic, lubrication and general industry.

		View Series PSM Data Sheet

To enquire about any product or to check price and availabilty click on the model number below.

Model #	Connection	Adjustment Range (mBar)	Membrane /Piston
PSM2R14	1/4 BSP	0.2-2	NBR (std)
PSM10R14	1/4 BSP	1-10	NBR (std)
PSM2R14AP	1/4 BSP	0.2-2	NBR (std)
PSM10R14AP	1/4 BSP	1-10	NBR (std)
PSM50R14	1/4 BSP	10-50	NBR (std)
PSM100R14SM	1/4 BSP	10-100	NBR (std)
PSP150R14SM	1/4 BSP	30-150	NBR (std)
PSP300R14SM	1/4 BSP	50-300	NBR (std)

Note:

Models of 100 Bar and greater are fitted with a pressure snubber suffix (SM). These can be removed if not required.

Some of the files included on site require Adobe® Acrobat® Reader software. You can download this software by clicking the logo.
Process Systems Pty Ltd reserves the right to change valve and product information plus prices without notice.